HELIPAD STRIPING & MARKINGS GUIDE
Helipad and heliport markings require accurate layout, clear geometry and careful coordination with the approved project requirements. These projects are different from standard parking lot striping because the marking plan is specific to the facility and aviation use.
Start With the Approved Layout
Dimensions, symbols, colors and marking locations should be established from the project drawings or requirements provided for the site. The striping crew should work from that approved information rather than assuming a standard parking-lot layout.
Surface Condition
Concrete or asphalt condition affects preparation and application. New concrete may also require an appropriate curing period before coatings are applied, depending on the specified material and project requirements.
Layout and Masking
Large symbols and geometric markings require careful measuring and masking. Establishing reference points before application helps keep the finished markings centered and proportioned according to the plan.
Material and Color Coordination
The required coating system and colors should be confirmed for the project surface and specification. Material selection should account for the substrate, environment and required finished marking system.
Commercial and Facility Coordination
Helipad work may take place at healthcare, industrial, commercial or other facilities where access must be coordinated. Scheduling should allow the marked area to remain protected during application and cure.
Helipad Striping FAQ
Can you work from project drawings?
Yes. Drawings and dimensions are the preferred starting point for preparing a project scope and layout.
Can new concrete be striped immediately?
The concrete condition, cure period and coating requirements should be reviewed before application.
Do you provide helipad striping nationwide?
Universal Striping can mobilize for commercial marking projects across the United States.
